
As a specialist in special scaffolding in Cologne, Bonn and the entire region, Gerüstbau Müller plans suspended scaffolds, modular scaffolds and special scaffolds in accordance with TRBS 2121-1 – for all cases where standard solutions are not enough.
Special scaffolds – also known as specialist scaffolds – are all scaffold structures that deviate from the manufacturer’s standard instructions for erection and use and are individually adapted to the conditions on site.
They are used when conventional standing scaffolds are not possible because of unusual geometries, a lack of standing space, ongoing operations or structural peculiarities – wherever facade scaffolding reaches its limits.
Under TRBS 2121-1 and BetrSichV, every special scaffold requires an individual risk assessment and proof of stability – either through a project-specific structural calculation or through the system manufacturer’s type calculation. Gerüstbau Müller coordinates this verification in full.

A suspended scaffold does not need any contact with the ground. It is attached directly to the load-bearing structure of the building – using chains, steel cables or steel beam structures – creating a stable working platform without any standing area on the ground.
Road and rail traffic continues undisturbed while the scaffold hangs from the underside of the bridge.
In historic buildings, the floor often cannot bear loads or the height is too great for a standing scaffold.
Above running machinery or conveyor belts, the suspended scaffold provides access without stopping production – find out more under industrial scaffolding.
Towers, silos, industrial chimneys – wherever no scaffold can be erected from below.
Standards and verification: Suspended scaffolds always require individual proof of stability. The suspension points – whether steel beams, concrete anchors or special foundations – must be inspected and documented. All lifting accessories and suspension cables are subject to regular mandatory inspection.
The modular scaffold is characterised by its plug-in principle: the individual components can be combined at any spacing and angle – ideal for structures with curves, projections, oriel windows or irregular floor plans. Unlike frame scaffolding, which relies on rectangular bays, the modular scaffold adapts to any geometry.
Irregular facades, towers and spires can be scaffolded without compromise.
Industrial plants with complex pipework and vessels, bridges and civil engineering structures.
Rooms with varying heights – with verified stability in accordance with DIN EN 12811-1.
Four tasks for which there is no off-the-shelf solution – and which we regularly build in the Cologne/Bonn region.
Bridge scaffolds are among the most demanding tasks in scaffolding: complex geometries, live traffic, work over water or at great height. Gerüstbau Müller plans and erects bridge scaffolds as standing, suspended or combined structures – always with individual structural calculations and full coordination with traffic authorities and clients.
Historic churches, listed buildings and public structures call for particular care: no anchoring in historic masonry, gentle fixing methods, consideration for visitors and ongoing use. Gerüstbau Müller has decades of experience in scaffolding historic buildings in the Cologne/Bonn region – from Romanesque churches to industrial monuments.
For events, open-air concerts and festivals, Gerüstbau Müller plans and erects stage scaffolding, spectator stands and event platforms. Fast erection, sound structural design, dismantling on schedule.
When construction sites block footpaths or cycle paths, a temporary bridge made from scaffolding components provides the necessary crossing – spans of up to 30 metres are possible, compliant with the standards and approved by the authorities.

For every special scaffold, Gerüstbau Müller takes care of the entire planning – from the on-site survey to the inspection report after erection.
As a member of the German Scaffolding Guild with over 90 years of experience, we know the particular requirements of every type of structure – we use Layher Allround and Rux Super. You will find an overview of all scaffolding types and areas of application on our services page.
Our yard is in Niederkassel, right between Cologne and Bonn. From there, our crews reach sites in the region quickly – an advantage especially for structures that require several site visits and adjustments.
Your project doesn’t fit into any category? Give us a quick call on +49 2208 4025 – Mon to Thu 7:00 am to 4:00 pm, Fri until 1:00 pm.
A special scaffold deviates from the manufacturer’s standard specifications and is individually adapted to the building. It always requires proof of stability and a risk assessment – Gerüstbau Müller takes care of both.
When there is no standing area – above roads or water, in halls or on bridges. A suspended scaffold is attached from above to the load-bearing structure and requires inspected suspension points and suspension cables.
Yes – that is its key advantage. Thanks to the plug-in principle, a modular scaffold can be configured at any angle and spacing – ideal for historic buildings, towers and irregular facades.
Yes – bridge scaffolds are planned so that road and rail traffic beneath the bridge can continue undisturbed. Gerüstbau Müller coordinates all the necessary permits with the relevant authorities.
The costs depend on the type of structure, the scaffold design, the proof of stability and the rental period. After a site visit, Gerüstbau Müller prepares a binding quote (lump sum or by measurement, depending on the building) – including all verifications and inspection reports. The quickest guide price comes from our online scaffolding calculator – in about 2 minutes, free and non-binding.
Does your project place special demands on the scaffolding? Gerüstbau Müller plans and erects suspended scaffolds, modular scaffolds and special scaffolds in compliance with the standards – with individual proof of stability and over 90 years of experience in the Cologne/Bonn region.